User Manual For CYCLONE Programmers
1
1
INTRODUCTION
PEmicro's
CYCLONE
production programmers are powerful, fast, and feature rich in-circuit
programming solutions. PEmicro offers two models which have the same feature set and only vary
by the devices supported.
The CYCLONE_ACP supports a wide variety of ARM Cortex devices.
The CYCLONE_UNIVERSAL supports those ARM Cortex devices as well as the following NXP
device families: Kinetis, LPC, S32, Qorivva (MPC5xxx), MPC5xx/8xx, DSC, S12Z, RS08, S08,
HC08, HC(S)12(X), and Coldfire.
Figure 1-1: CYCLONE
Supported Architectures
CYCLONE
programmers are designed to withstand the demands of a production environment.
They are Stand-Alone Programmers (SAP) that can be operated manually or used to host
automated programming. In manual SAP mode the Cyclone is operated using the touchscreen
LCD Menu and/or the Start button. Host-controlled SAP mode, for automated programming, is
accomplished using either a command line utility, RS232 protocol, UDP protocol, or the Cyclone
Automated Control DLL.
P&E also offers
CYCLONE
FX
programmers which include enhanced speed, storage, security,
and other features that make them an incredibly powerful and versatile solution. For more
information, visit pemicro.com/cyclone.
1.1
Feature Overview/Comparison
CHAPTER 17 - CYCLONE FEATURE OVERVIEW / COMPARISON
for a
CYCLONE
feature
overview and comparison with the
CYCLONE
programmers.
