71 | FR
Instructions pour l'installation
2. Le boîtier de raccordement doit être situé
pour qu’il y ait un maximum d’espace entre
lui et four pour qu’il puisse être déplacé en
cas de panne.
3.
Un connecteur conduit U.L. listed doit être
placé à chaque extrémité du câble de
raccordement d
’alimentation
.
Connexions Electriques
Assurez-vous
que
votre installation
est
correctement installée et branchée par un
technicien
qualifié.
Demandez
à
votre
revendeur un technicien qualifié ou un service
de réparation agréé.
Cet appareil est fabriqué avec un conducteur de
terre vert connecté au châssis du four. Après vous
être assurer qu’il n’y a plus de courant, branchez
le conduit
flexible depuis le four jusqu’au boîtier
de raccordement en utilisant un connecteur de
conduit U.L. listed. Les figures suivantes et les
instructions fournies présentant la manière la plus
commune de brancher un four. Vos codes locaux
et règlements sont évidemment prioritaires sur
ces
instructions.
Effectuez
les
connexions
électriques conformément aux codes locaux et les
règlements.
“AVERTISSEMENT” Risque d’électrocu-tion,
cad
re à la masse à une position neutre d’un
appareil par une liaison.
Mettre à la masse par un conducteur neutre est
interdit pour les nouvelles installations de circuit
électrique (1996 NEC); les mobile homes; et les
véhicules de parc, ou dans les régions où les
codes locaux interdisent de brancher à la masse à
travers
un
conducteur
neutre.
Pour
les
installations où la mise à terre par un conducteur
neutre est interdit:
•
Déconnectez la masse du conducteur neutre
aux extrémités libres du conduit ;
•
Utilisez la borne de terre ou une broche de
raccordement pour mettre à la terre l
’unité;
et
•
Connectez la borne de neutre ou une broche
de raccordement à un circuit de dérivation
neutre de la manière habituelle.
Connexion à 3 Fils (Pour US seulement)
Selon la Figure suivant, où les codes locaux
permettent la connexion du conducteur de terre
du four au fil NEUTRE du circuit de branchement
(fil gris ou coloré blanc):
•
Si les codes locaux le permettent, connectez
le conducteur de terre vert du four et le fil
blanc du four au fil NEUTRE du circuit de
branchement (fil gris ou coloré blanc).
•
Connectez les broches de raccordement du
four
aux
broches
de
raccordement
correspondantes
dans
le
boîtier
de
raccordement.
Connexion à 4 Fils (Pour des US ou
CANADA)
Selon la Figure suivant :
•
Déconnectez la masse du point neutre aux
extrémités du conduit.
•
Connectez le conducteur de terre vert du
four au conducteur de terre dans le boîtier
de raccordement (fil nu ou coloré vert).
•
Connectez les broches de raccordement
rouge et noir du four aux broches de
raccordement correspondantes dans le
boîtier de raccordement.