49
19
4.2.4.9- Flow switch
The fl ow sensor detects whether or not there is water fl ow in the piping. If it detects that there is no fl ow,
the equipment will stop and an alarm will sound accompanied by a red warning LED. Once the fl ow has been
reestablished, the equipment will return to normal operati on.
The “Kit Flow” (opti onal) is necessary to acti vate the fl ow sensor, which is done by pressing OK in the menu.
4.2.5- Chlorine menu
With this menu you can select all parameters related to chlorine producti on.
4.2.5.1- Production of cl
Confi guración de la producción máxima de cloro.
Confi gurati on of the maximum producti on of chlorine. From 0% to 100% Press “OK” and use the arrows ↓↑
to change the value. Press “OK” to confi rm the adjustment.
Note: Chlorine producti on may be limited regardless of the operati on mode (manual, automati c...) that is
selected.
4.2.5.2- Adjustment of the set value (Max. ORP or Max. PPM)
ORP Mode in which a Redox probe (OPTIONAL) is installed.
In this case, adjust the oxidati on potenti al to the required level. For private swimming pools that are not used
frequently, 650 mV is a suffi cient value 700 mV is the suitable value for the majority of swimming pools. Press
“OK” to confi rm the adjustment.
NOTE: if working in automati c, you can also adjust the producti on percentage from 0% to 100%
PPM Mode in which a free chlorine probe (OPTIONAL) is installed.
In this case, adjust the value in ppm as required. A value between 1ppm and 1.5ppm is correct.
NOTE: if working in automati c, you can also adjust the producti on percentage from 0% to 100%
On connecti ng the equipment in automati c mode, the ORP value will fl ash for 5 min before the equipment
starts to produce chlorine.
Tiempo filtro
> 2h 23min
Pulse OK
→-o-o- ON (n.o.)
-o o- OFF (n.c.)
SALIR
*
→Produción cl.
ppm
Supercloración
Calibración
↓
OFF
1.50
100%
Summary of Contents for SMARTCL15127
Page 60: ...MIPA SMCL 150604...
