English
16
7.
Operating Instructions
Be aware of the Safety Instructions (Chapter 3)
Please refer to the sketches on the first pages of this manual.
1.
Switch on the device. (button 3)
2.
Hold the tip of the voltage tester as close as possible to a power outlet or
cable.
3.
When the PAN Voltfinder detects an AC voltage signal, the LED in the tip
flashes according to the height of the AC voltage. (low, medium, high) At
the same time, three different alarm signals sound.
Attention!
Even without an alarm, dangerous voltage can be concerned! This
depends on various factors. Therefore, if necessary, check the zero
voltage with the voltmeter.
Point Illumination (Torch light)
To turn the measuring point illumination (torch light) on or off, press button 4.
8.
Maintenance
Only authorized service technicians may repair the instrument.
Changing the battery(s)
If the device does not respond during the function test replace the battery.
1.
Open the battery compartment.
2.
Replace the spent battery with a new one - note the correct polarity
3.
Close the battery compartment.
4.
Disposal of the flat battery should meet environmental standards.
Summary of Contents for PAN VOLTFINDER
Page 1: ...PAN Voltfinder...
Page 2: ...2 F i g 1...
