PANCONTROL PAN Leitungssucher, Manual

Page: 31 / 179

EN 8
6. The LEDs and their meaning
LEDs red:
(3) Error display
(Blinks when an error is detected.)
SHORT short ciurcuit (Note Fig. 3)
REVERSED wires swapped (Note Fig. 4)
MISWIRED wiring error (Note Fig. 5)
SPLIT PAIRS pairing error (Note Fig. 6)
(5) CONT Lights up when the circuit is closed. If the impedance is low,
the LED lights brighter.
(7) ON / OFF Power indicator / If the power indicator (7) is flashing, replace
the batteries.
(12) SCAN Lights when an audio signal is sent.
(13) Lights up at high scanning speed or at high audio frequency.
LEDs green
1 - 8 + G Wiring Display
Hz
S F .