Watching TV
Antenna / Cable service without a box
Initial setting
1.
Connect coax
Connect a COAX wire from either an antenna or Basic Cable service to the
TV's "ANTENNA/CABLE IN" screw terminal.
TV (ANTENNA/CABLE IN)
Antenna
2.
Scan the channel
MENU
Menu
>
Setup
>
ANTENNA/Cable setup
>
ANTENNA/Cable signal
,
Auto program
1. Select either
Cable
or
Antenna
programming source in
ANTENNA/Cable signal
.
2. Select
Auto program
and then the appropriate scan mode:
(
All channels
/
Analog only
/
Digital only
).
3. Start scanning.
If no channels are found by the end of the scan, then check the
following:
Antenna's position - or availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to
the TV's A/V inputs, preferably HDMI, for best HD picture. In such a
case, the channel scanning is not needed.
1.
Connect coax
1.
Connect coax
1.
Connect coax
Connect a COAX wire from either an antenna or Basic Cable service to the
TV's "ANTENNA/CABLE IN" screw terminal.
Connect a COAX wire from either an antenna or Basic Cable service to the
TV's "ANTENNA/CABLE IN" screw terminal.
TV (ANTENNA/CABLE IN)
Antenna
TV (ANTENNA/CABLE IN)
Antenna
TV (ANTENNA/CABLE IN)
Antenna
2.
Scan the channel
2.
Scan the channel
2.
Scan the channel
MENU
Menu
>
Setup
>
ANTENNA/Cable setup
>
ANTENNA/Cable signal
,
Auto program
MENU
Menu
>
Setup
>
ANTENNA/Cable setup
>
ANTENNA/Cable signal
,
Auto program
MENU
Menu
>
Setup
>
ANTENNA/Cable setup
>
ANTENNA/Cable signal
,
Auto program
MENU
Menu
>
Setup
>
ANTENNA/Cable setup
>
ANTENNA/Cable signal
,
Auto program
Menu
Setup
ANTENNA/Cable setup
ANTENNA/Cable signal
,
Auto program
ANTENNA/Cable signal Auto program
1. Select either
Cable
or
Antenna
programming source in
ANTENNA/Cable signal
.
2. Select
Auto program
and then the appropriate scan mode:
(
All channels
/
Analog only
/
Digital only
).
3. Start scanning.
1. Select either
Cable
or
Antenna
programming source in
ANTENNA/Cable signal
.
2. Select
Auto program
and then the appropriate scan mode:
(
All channels
/
Analog only
/
Digital only
).
3. Start scanning.
Cable
Antenna
ANTENNA/Cable signal
ANTENNA/Cable signal
Auto program
Auto program
All channels
All channels Analog only
Analog only Digital only
Digital only
If no channels are found by the end of the scan, then check the
following:
Antenna's position - or availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to
the TV's A/V inputs, preferably HDMI, for best HD picture. In such a
case, the channel scanning is not needed.
If no channels are found by the end of the scan, then check the
following:
Antenna's position - or availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to
the TV's A/V inputs, preferably HDMI, for best HD picture. In such a
case, the channel scanning is not needed.
If no channels are found by the end of the scan, then check the
following:
Antenna's position - or availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to
the TV's A/V inputs, preferably HDMI, for best HD picture. In such a
case, the channel scanning is not needed.
17
(0100301)