background image

1.3 Accessories

 Installation Guide (this document) 

1 (*)

 Mounting bracket (for 19-inch rack) 

2

 Screw (for 19-inch rack) 

4

 Screw (for fixing the main unit and the mounting bracket) 

8

 Rubber foot 

4

 Dummy SD card 

1

 Power cord 

2

* Just the PN88162C-TH has 1 Installation Guide in Thai (a total of 2 guides).

[Power Cord]

Please be sure to confirm the content.

The following power cords are supplied as per the intended nation of delivery.

The XXs are identical to the intended nation of delivery codes.

Please contact our distributor if any of the contents are insufficient.

Quantity

 SFP+ Direct attach cable (OPSFPPK-T01)  

1

[Optional accessories]

 PN54021K-XX 1000BASE-SX SFP Module

 PN54023K-XX 1000BASE-LX SFP Module

 PN59021-XX  10GBASE-SR SFP+ Module

 PN59023-XX  10GBASE-LR SFP+ Module

9

Locale

Thailand

250 VAC 6 A

TIS166-2549

-

Indonesia

250 VAC 10 A

250 VAC 10 A

250 VAC 5 A

CEE7/7

BS1363

BS1363

-

13 A

5 A

Malaysia

Singapore

Product Number

PN88162C-TH

PN88162C-ID

PN88162C-MY

PN88162C-SG

250 VAC 10 A

AS/NZS 3112

-

Australia

New Zealand

PN88162C-NZ

Power Cord Rating FUSE Rated Current

Plug Type

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power 

cord to this Ethernet Switch and connect the other end into an electric outlet. 
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
The Ethernet Switch is equipped with1 or 2 power cords, so if the AC power supply is 

normally supplied to the power ports, the corresponding POWER LEDs will light up 

green, and the other LEDs will all light up.
Then, STATUS LED lights in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, STATUS LED light in green, and the Ethernet Switch 
starts operation as a Ethernet Switch.
When this Ethernet Switch successfully communicates with a terminal connected to a 
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not 
supplied to the terminal, the Port LED does not light up.

For configuration and management method, please see the PDF version 

Operating Instructions on Panasonic’s website.

Summary of Contents for ZEQUO 5410DL
















Reviews: