24
Pairing
4
Pair the microphone to the wireless receiver / extension receiver
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green, then press for at least two seconds the [REG] button of the channel to
which you want to pair a microphone. Both the microphone and the wireless receiver /
extension receiver will enter pairing mode and pairing will start.
During pairing mode, the [PWR] indicator on the microphone and the [REG] indicator
of the channel whose [REG] button has been pressed on the wireless receiver /
extension receiver will blink orange.
If pairing is completed successfully, the [PWR] indicator on the microphone switches to
the normal status according to the remaining battery level (green, orange, or red), and
the [REG] indicator on the paired channel on the wireless receiver / extension receiver
lights green for one second and goes off.
If pairing could not be completed successfully, the [PWR] indicator on the
microphone will blink red.
Register button
Power indicator
Register indicator
* This illustration shows
the WX-SR202P.
5
Unplug the microphone from the wireless receiver / extension receiver
Unplug the cable connecting the microphone to the wireless receiver / extension
receiver.
If pairing has been completed successfully, the audio from the microphone is
transmitted.
6
Place the battery cover back on
Place the battery cover onto the microphone and turn it right to fix it.
memo
Important
While the microphone is in use, the [REG] button of the corresponding
channel on the wireless receiver or extension receiver is disabled. Turn the
currently paired microphone power OFF, then you can pair a different
microphone to the channel that is already in use.
When a channel on the wireless receiver / extension receiver is in pairing
mode, all other channels can still be used as normal.
Setting the microphone selection switch is optional.
PGQX2326UAV6_WX-ST200_OI_en-fr.indb 24
2022/01/24 11:18:00
