14
Usage precautions
Network security
memo
Important
Periodically change the password by the support software to improve
security.
System start-up time
In order to ensure the privacy of the microphone signals, the system checks the
authentication data of all connected antennas and paired microphones (up to 12
microphones) during start-up. Because of this, the system start-up time will be different
depending on the number of connected antennas and paired microphones, and on
whether wireless synchronization is being used or not. See the following table for
average start-up times.
* If the system is set as a sub-system in the wireless synchronization settings, wireless syn-
chronization with the other systems will be performed during start-up.
Average start-up time
Connected
antennas
Start-up time
Stand-alone system
Main system
Sub-system
1
Approx. 15 seconds
Approx. 19 seconds
21 to 23 seconds
2
Approx. 16 seconds
Approx. 21 seconds
23 to 25 seconds
4
Approx. 17 seconds
Approx. 23 seconds
25 to 27 seconds
8
Approx. 19 seconds
Approx. 26 seconds
28 to 30 seconds
Sub-systems will look for systems to synchronize with during start-up. If no such system
is found or if synchronization failed, the start-up time will increase by approximately 12 to
20 seconds.
When not using for an extended period of time
Turn the power switch to OFF and remove the power plug from the electric outlet.
Condensation
Be careful of condensation, as it may cause malfunctions.
Condensation is likely to happen in the following scenarios:
High humidity
Moving from a cold place to a hot or humid one
If condensation does happen, wait for one to two hours and make sure that all
condensation is gone before turning ON the equipment.
Maintenance
Perform it after having turned OFF the product. It may lead to injury.
Clean the product with a dry, soft cloth.
Do not use volatile chemicals such as paint thinner or benzene.
When using chemically treated cloths, carefully read the included instructions.
When the product is particularly dusty, use a vacuum cleaner etc. to clean it.