PHASE EIGHT@
INSTRUCTIONS FOR
INSTALLATION
AND OPERATION
CONTROLS FOR MOTORIZED
ZOOM LENSES
MODEL
VlOOC, VlOOZF
AND
GENERAL
SCOPE
The information in this instruction manual
covers the installation, operation, and
maintenance of the following lens controls:
VlOOC
VlOOZF
These units should be installed using approved
materials and wiring practices in accordance
with the National Electrical Code and
applicable local wiring ordinances.
INTRODUCTION
This series of motorized zoom lens controls
enables remote operation of most Vicon zoom
lenses, including those with internal
electronic
circuitry. On each model,
circuit interlock prevents damage that could
occur when buttons for opposing functions are
pushed simultaneously. Speed control is
accomplished by a panel-mounted potentiometer
and internal range compensation.
These rugged controls are housed in the
compact PHASE EIGHT* module and contain
durable solid-state circuitry. PHASE EIGHT
modules may either be rack-mounted or
installed in desk-top units. The
Card
Cage is designed to fit in a standard 19-inch
rack. The
holds any combination of
single-, double-, or triple-size modules
totaling eight positions. When desk-top
REF. NOTES
SHEET NO. REV.
SEC.
SUPERSEDES
X104-386
X104 687
VlOOC LENS CONTROL
installations are desired, the
and
are available with four and eight positions,
respectively. (See Associated Equipment and
Accessories for variation.)
Model VlOOC may be used with any Vicon
motorized zoom lens (indicated by the suffix M
in the part number) or with an Intraspot* lens
(suffix MS) when manual operation of the iris
is required.
Model VlOOZF is used both with motorized
zoom lenses (suffix AC or SND), which feature
internal
circuitry,
and
with cameras
not requiring iris control.
Model
is identical to Model VlOOC
except that it provides circuitry for control
of zoom lenses having a built-in motorized
extender (suffix MSX).
All models operate lenses up to the distances
shown in Table 1.
WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THESE UNITS TO RAIN OR MOISTURE.
Vicon part number 8006-9104-02-00
Product Specifications subject
change
*Registered Trademarks of Vicon Industries Inc.
Patent pending on PHASE EIGHT.
INDUSTRIES INC.
525 BROAD HOLLOW ROAD, MELVILLE.
11747 TEL:
293-2200 TELEX: 144581
TOLL FREE: 800-645-9116
(OUTSIDE OF NEW YORK)
