14
Replacing a battery
• Carefully read the "Precautions" and proceed accordingly.
• To replace the battery, turn off the power of the microphone, and make sure that the micro-
phone is not connected to the charger.
• The following indicates that either the dry cell is depleted or the rechargeable battery has
run out. In this case, install a new dry cell or charge the rechargeable battery.
• The battery indicator lights red
• The battery indicator does not light
Note:
• Do not touch the battery poles with hands. Otherwise poor contact or noise may result.
If dirty, wipe off with a dry soft cloth.
• Battery power is slightly consumed even when the power of this product is OFF. If the bat-
tery is left unused, that may result in liquid leakage. To prevent this, remove the battery
from the product when unused for a long time.
1
Turn off the power by pressing the power switch.
Confirm that the battery indicator is off.
2
Remove the battery cover.
Pull the battery cover in the arrow direction while pressing the
A
portion with both right and
left thumbs to remove the cover.
3
Install a new battery.
When removing the used battery, lift out the + side, then the – side.
When installing the battery, check the polarity.
If using a rechargeable battery, install one AA size nickel metal hydride battery, if using a
dry cell, install one AA/LR6 size alkaline dry cell, paying attention to the polarity marks (+,
–) of the battery slot.
4
Attach the battery cover.
Push up the battery cover, and fit it to its original position.
5
Confirm that the battery indicator lights.
Press the power switch or power push-button switch, turn on the power of the microphone,
and confirm that the battery indicator lights green or orange.
1, 5
4
2
3
Battery indicator
Battery cover
A
Battery
3TR006021BZA̲WX-LT150 09.5.22 04:08 PM ページ14
