Panasonic WX-CH450, Operating Instructions Manual

Page: 17 / 49

17
w
Deletion of ID
When the Center Module is WX-C3010, delete the ID of this
product according to the following procedure.
p
This function takes effect only when DIP switch No.4 is at
the ON setting (WX-C3010).
If it is at the OFF setting (WX-CC411, WX-CC412), it
is not necessary for the ID to be deleted manually. The
Center Module will delete it automatically.
Hold down the [POWER] button for 2 seconds
or more to turn off the headset.
For deleting an ID registered in the Center Module of Lane A
Press the [POWER] button for 1 second or
more while holding down the [F] and [T1]
buttons to turn on the power.
p
The unit starts in “Delete ID mode”. The power
indicator blinks orange.
For deleting an ID registered in the Center Module of Lane B
Press the [POWER] button for 1 second or
more while holding down the [F] and [T2]
buttons to turn on the power.
p
The unit starts in “Delete ID mode”. The power
indicator blinks orange.
Press the [P] button.
p
The ID is deleted instantly, the voice message “ID
not registered” is heard from the earphone, and the
power indicator blinks red to indicate an abnormal
state.
p
If Deletion of ID fails, an error beep and the voice
message “Failed” are heard from the earphone,
and the power indicator blinks red to indicate an
abnormal state. If that happens, retry from step 1.
p
When the number of ID registrations of this product or
the Belt Pack (or the Order Taker) exceeds the Center
Module’s upper limit, the Center Module deletes some
IDs automatically. If a unit of this product or the Belt
Pack (or the Order Taker) is not used for an extended
time after being registered, its ID may be deleted.
Important
w
Voice prompt language
switchover
You can change the language used for voice prompt. You
can select one from “English”, “French”, “Spanish”, and “No
voice prompt” as the language for voice prompt.
Hold down the [POWER] button for 2 seconds
or more to turn off the headset.
Press the [POWER] button for 1 second or
more while holding down the [P] button to turn
on the power.
p
The power indicator blinks orange and the lane
indicator remains off.
Press the [T1] button to change the language.
When the [T2] button is pressed, the voice
prompt message starts in the language
selected after a beep.
English: “Hello”
French: “Bonjour”
Spanish: “Buenos Dias”
No voice prompt: –
Press the [P] button.
p
The currently selected language is set, and this
product restarts automatically.
English