39
English
p
p
When registering multiple Wireless Repeaters, do the
ID registration procedure one at a time in order. ID
registration may not be successful if you try to do the
ID registration procedure for multiple units at the same
time.
p
p
Do not unplug the USB cable or USB power adaptor
from the Wireless Repeater during ID registration. ID
registration may not be completed successfully. If ID
registration does not go well, touch the [Stop] button
on the Center Module to exit the ID registration mode,
then try it again.
p
p
If ID registration fails, the ID of the Wireless Repeater
is not registered to the Center Module, and the
[STATUS] indicator on the Wireless Repeater lights red
or blinks red.
p
p
The IDs of up to 2 Wireless Repeater units can be
registered in each single Center Module.
p
L
When WX-CC411BP is used, 2 can be registered in
1 lane.
p
L
When WX-CC412BP is used, you can register 1
Wireless Repeater per lane or 2 in 1 lane.
Important
p
p
Do not re-register the same Wireless Repeater to one
Center Module.
p
L
ID registration will fail if you try to register an already
registered Wireless Repeater to the same lane.
p
L
When using WX-CC412BP, you can register an
already registered Wireless Repeater to a different
lane; however, it can then only be used in the
lane where it is newly registered. The previous
ID registration of the Wireless Repeater must be
deleted.
p
p
When using with a Wireless Repeater registered to the
Center Module, use software version 2.0 or later on
the All-In-One Headset WX-CH457P.
Note
p
w
Convenient Functions
(Other Functions)
Auto-TALK-Lock
This function enables the All-In-One Headset or Belt Pack of
pre-determined store personnel to automatically enter talk
mode when a customer approaches the order post. (Talk-
Lock mode)
For details on how to set Auto-Talk-Lock mode, refer to the
Operating Instructions for the Belt Pack (WX-CT420) or All-
In-One Headset (WX-CH450/WX-CH455/WX-CH457P).
Manager mode
One of all the All-In-One Headsets or Belt Packs in a lane
can be set to manager mode.
The All-In-One Headset or Belt Pack in manager mode has
a higher priority than the other All-In-One Headsets or Belt
Packs, and can monopolize one of the four communication
channels.
This means that the manager can talk or page at any time.
For details on how to set manager mode, refer to the
Operating Instructions for the Belt Pack (WX-CT420) or All-
In-One Headset (WX-CH450/WX-CH455/WX-CH457P).
Screen saver
When no operations are performed for 3 minutes on the
LCD display, the back light of the LCD display automatically
turns off to enable power consumption to be reduced. The
screen turns off when the back light is turned off.
Refer to the Operating Instructions <Setup Instructions>
(PDF file) for information about how to set the screen saver.
Call button connection
Customers at the order post can call store personnel by
pressing the external button.
When using a touch panel type order post, it is possible
to install a call button which enables calls to the store
personnel when the button is pressed.
WX-CC411BP_PUQX1028ZAV1_IG.indb 39
2022/03/07 11:26:42
