37
English
p
p
When registering the IDs of a multiple number of All-
In-One Headsets or Belt Packs, register the ID of each
unit in sequence. If an attempt is made to register the
IDs of multiple units at the same time, the IDs may not
be registered correctly.
p
p
During the ID registration process, do not turn off the
power of the All-In-One Headsets or Belt Packs or
remove their batteries. Otherwise, their IDs may not be
registered correctly. If the registration is not proceeding
smoothly, touch the [Stop] button on the Center
Module, exit ID registration mode, and then try again.
p
p
When ID registration fails, a “BUU-UU-UU” warning
sounds in the All-In-One Headset or Belt Pack
concerned, and then the “Failed” voice prompt is heard.
If an ID registration has failed, the ID of the All-In-
One Headset or Belt Pack will not be registered in the
Center Module, and the power indicator of the All-In-
One Headset or Belt Pack concerned will blink in red.
p
p
The IDs of up to 32 All-In-One Headsets or Belt Packs
can be registered in one Center Module. If an attempt
is made to register IDs for more than 32 units, the IDs
of the headsets not used for the longest time will be
automatically deleted, and then the IDs of the new
units will be registered.
p
p
It is not possible to register the ID of a Wireless
Repeater while ID registration mode of the All-In-One
Headsets or Belt Packs is active.
Important
p
w
Concerning Wireless Repeater
ID registration
p
p
ID registration of the Wireless Repeater is required when
extending the coverage area.
p
p
For ID registration, set the Center Module to ID
registration mode, and proceed with the registration by
operating the Wireless Repeater.
1
Connect the USB power adaptor to the Wireless
Repeater and confirm that [STATUS] indicator lights
red or blinks red.
p
p
The [STATUS] indicator lights red if the ID registration
information for the Center Module is not in the
Wireless Repeater.
p
p
If ID registration information for the Center Module
remains in the Wireless Repeater, the indicator blinks
orange (or green) for about 3 seconds before starting
to blink red.
Note
2
Touch
(setting button) on the touch
panel.
p
p
The password input screen appears.
3
Input the password, and touch the [Login]
button.
p
p
Change the password at regular intervals for security
purposes.
Important
p
p
The setting menu is displayed.
WX-CC411BP_PUQX1028ZAV1_IG.indb 37
2022/03/07 11:26:41
