background image

5

PRECAUTIONS

• Refer all work related to the installation of this

product to qualified service personnel or system
installers.

• Do not attempt to disassemble the appliance.

To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.

• Handle the appliance with care.

Do not strike or shake it, as this may damage the appli-
ance.

• Do not expose the appliance to water or moisture,

nor try to operate it in wet areas.

Take immediate action if the appliance becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personnel. Moisture may damage the appliance
and also cause electric shock.

• Do not use strong or abrasive detergents when

cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.

• Do not operate the appliance beyond its specified

temperature, humidity or power source ratings.

Use the appliance at temperatures within –10 °C to
+50 °C (14 °F to 122 °F) and a humidity below 90 %.
The input power source for this appliance is 120 V AC
60 Hz.

Summary of Contents for WVCU550CJ - SYSTEM CONTROLLER













Reviews: