-39-
• DIGITAL FLIP
• PRIVACY ZONE
• CAMERA ID
• PROPO.PT
• PAN LIMIT
• ZOOM LIMIT
• TILT ANGLE
• CLEANING
After starting the patrol-learn, the following manual
operations are stored.
• PAN/TILT/ZOOM/FOCUS operation
• IRIS operation
• Preset positioning
The auto focus function is disabled during the patrol
operation. Under such circumstances, the camera
goes out of focus when zooming in with WIDE
selected resulting from a characteristic of a zoom
lens. For storing the zoom operation, start with the
TELE mode keeps the camera in focus.
The patrol operation ranges from the horizontal
direction to the downward direction. The digital flip
function is disabled (page 34).
2. Open the SET UP menu and move the cursor to
SPECIAL 1. For PATROL, select LEARN, PLAY or
STOP with the joystick.
The factory default setting is STOP.
LEARN:
A series of manual operations is stored.
PLAY:
Stored operations are reproduced.
STOP:
LEARN or PLAY is not activated.
PATROL LEARN with a Controller Having PATROL
Button
1. Press the PATROL button and the CAM (SET) button
simultaneously to start patrol-learn. The setup menu
displays "LEARNING(60S)", and the starting points
are stored. (unit: s)
2. Operate patrol-learn manually. The operation data is
stored. The countdown to complete learning is dis-
played.
3. To stop patrol-learn, press the PATROL STOP but-
ton.
Patrol-learn with a Controller not Having the
PATROL Button
1. Close the SET UP or SPECIAL 1 menu to start
PATROL LEARN. Starting point parameters are
stored and "LEARNING(60S)" is displayed on the
monitor.
LEARNING(60S)
2. Operate patrol-learn manually.
3. Open the SET UP menu to stop learning.
Notes:
• It is recommended to set PAN LIMIT to ON for
patrol-learn. Otherwise PAN LIMIT is invalid in
playback.
• If the power fails in the patrol-learn mode, start
the patrol-learn function again from the starting
point.
• LEARN also stops 1 minute after starting if the
memory is full.
• Auto refreshing may be activated in the patrol
play mode or the auto mode to calibrate the lens
position.
Patrol Play with a Controller Having the PATROL
Button
1. Press the PATROL PLAY button. The camera turns
to the starting point and reproduces the operations
stored in the memory. Iris operation is valid only in
the playback mode.
2. Press the PATROL STOP button and PROGRAM
button simultaneously to stop playback or press any
manual operation button (e.g., PAN/TILT/ ZOOM/
FOCUS) except the iris buttons.
Patrol Play with a Controller not Having the PATROL
Button
1. Select patrol play in the setup menu, and then close
the menu. The camera turns to the starting point and
the operations stored in memory are reproduced.
Iris operation is valid only in the playback mode.
2. Open the SET UP menu, or press any of manual
operation button (e.g., PAN/TILT/ZOOM/FOCUS)
except the iris buttons to stop playback.
Patrol Play with the AUTO PAN Button
1. If the PATROL PLAY function is assigned to the
AUTO PAN button, press the AUTO PAN button to
turn the camera back to the starting point and to
reproduce the operation data stored in the memory.
2. To stop playback, press the PATROL STOP button
or any manual operation button (e.g., PAN/TILT/
ZOOM/FOCUS) except the iris buttons.
Notes:
• In the patrol play mode, the camera movement may
occasionally deviate from the entered routine when
the routine includes a move to a preset position. If
this happens, re-enter the routine of manual opera-
tions for patrol-learn.
• In the patrol play mode, black and white automatic
switching does not work.
• In the patrol play mode, when the power of the con-
troller is turned on or off, the patrol play stops. In this
case, press the PATROL PLAY button again. (If
SELF RETURN is set to ON, the patrol play will start
again after elapsing the setting return time.)
Summary of Contents for WVCS574 - COLOR CCTV CAMERA
Page 59: ... 59 FRANÇAIS VERSION FRANÇAISE FRENCH VERSION ...
Page 117: ... 117 ...
