Color CCD Cameras
35
TECHNICAL SPECIFICATIONS
®
4
WV-CP230
The digital processing color camera shall be a Panasonic Model WV-CP230 or equivalent. The camera shall feature a
1
⁄
3
" interline
transfer CCD pickup device with 380,000 [768(H) x 494(V)] pixels with a microlens on each pixel. The camera shall produce a horizontal
resolution of 480 lines and a signal-to-noise ratio of 50dB with 1H enhancement. The camera’s Digital Signal Processing (DSP) shall
minimize aliasing and feature advanced digital back light compensation (BLC). The camera’s Automatic Gain Control (AGC) shall
provide clear images in low light conditions. The camera shall display useable color pictures at a scene illumination of 2 lux (f/1.4). The
camera synchronization shall be internal, line-lock (phase adjustable) and VD2 (vertical drive lock). The video signal shall be
transmitted up to 3000' over coaxial cable (Belden 9259 or equivalent), when used with the Panasonic model WJ-FS616/WV-PB6164
multiplexer with control kit, Matrix System 500, Matrix System 850 and single camera controller, model WV-CU151. The camera lens
mount configuration shall accept both C- and CS-mount lenses, as well as both DC and video control voltage for ALC servo lenses, and
feature Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between
1
⁄
60
sec. and
1
⁄
15,700
sec.) which allows for
the use of inexpensive fixed and manual iris lenses. The power source shall be 120VAC (4.1W). The camera shall be enclosed in an all
steel housing and shall be UL listed. The camera’s dimensions shall not exceed 2
9
⁄
16
"H x 2
5
⁄
8
"W x 4
13
⁄
16
"D.
WV-CP232
The digital processing color camera shall be a Panasonic Model WV-CP232 or equivalent. The camera shall feature a
1
⁄
3
" interline
transfer CCD pickup device with 380,000 [768(H) x 494(V)] pixels with a microlens on each pixel. The camera shall produce a horizontal
resolution of 480 lines and a signal-to-noise ratio of 50dB with 1H enhancement. The camera’s Digital Signal Processing (DSP) shall
minimize aliasing and feature advanced digital back light compensation (BLC). The camera’s Automatic Gain Control (AGC) shall
provide clear images in low light conditions. The camera shall display useable color pictures at a scene illumination of 2 lux (f/1.4). The
camera synchronization shall be internal, line-lock (phase adjustable) and VD2 (vertical drive lock). The video signal shall be
transmitted up to 3000' over coaxial cable (Belden 9259 or equivalent), when used with the Panasonic model WJ-FS616/WV-PB6164
multiplexer with control kit, Matrix System 500, Matrix System 850 and single camera controller, model WV-CU151. The camera lens
mount configuration shall accept both C- and CS-mount lenses, as well as both DC and video control voltage for ALC servo lenses, and
feature Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between
1
⁄
60
sec. and
1
⁄
15,700
sec.) which allows for
the use of inexpensive fixed and manual iris lenses. The power source shall be 12VDC (300mA). The camera shall be enclosed in an all
steel housing and shall be UL listed. The camera’s dimensions shall not exceed 2
9
⁄
16
"H x 2
5
⁄
8
"W x 4
13
⁄
16
"D.
WV-CP234
The digital processing color camera shall be a Panasonic Model WV-CP234 or equivalent. The camera shall feature a
1
⁄
3
" interline
transfer CCD pickup device with 380,000 [768(H) x 494(V)] pixels with a microlens on each pixel. The camera shall produce a horizontal
resolution of 480 lines and a signal-to-noise ratio of 50dB with 1H enhancement. The camera’s Digital Signal Processing (DSP) shall
minimize aliasing and feature advanced digital back light compensation (BLC). The camera’s Automatic Gain Control (AGC) shall
provide clear images in low light conditions. The camera shall display useable color pictures at a scene illumination of 2 lux (f/1.4). The
camera synchronization shall be internal, line-lock (phase adjustable) and VD2 (vertical drive lock). The video signal shall be
transmitted up to 3000' over coaxial cable (Belden 9259 or equivalent), when used with the Panasonic model WJ-FS616/WV-PB6164
multiplexer with control kit, Matrix System 500, Matrix System 850 and single camera controller, model WV-CU151. The camera lens
mount configuration shall accept both C- and CS-mount lenses, as well as both DC and video control voltage for ALC servo lenses, and
feature Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between
1
⁄
60
sec. and
1
⁄
15,700
sec.) which allows for
the use of inexpensive fixed and manual iris lenses. The power source shall be 24VAC, 60Hz (4.1W). The camera shall be enclosed in an
all steel housing and shall be UL listed. The camera’s dimensions shall not exceed 2
9
⁄
16
"H x 2
5
⁄
8
"W x 4
13
⁄
16
"D.
WV-CP230 Series
1
⁄
3
" Color
CCD Cameras
GENERAL SPECIFICATIONS
Pickup Device
768(H) x 494(V) pixels, interline transfer
CCD
Scanning Area
4.92(H) x 3.70(V)mm (equivalent to
1
⁄
3
" tube)
Synchronization
Internal/line lock/VD2 lock
Scanning System
2:1 interlace
Scanning
525 lines/60 fields/30 frames
Horizontal: 15.734kHz
Vertical: 59.94Hz
Horizontal Resolution
480 TV lines
Video Output
1.0Vp-p NTSC composite/75 ohms
(through specified circuit)
S/N Ratio
50dB (luminance S/N) (AGC off, weight on)
Electronic Light
Control
Equivalent to continuous variable shutter
speed between
1
⁄
60
–
1
⁄
10,000
sec.
Minimum Illumination
2.0 lux (0.2 fc) at f/1.4
AGC
On only
White Balance
ATW (Auto Tracking White Balance)
control
Aperture Correction
Selectable sharp or soft
Iris
Selectable ELC or ALC
Back Light
Compensation
Selectable normal or back light
compensation
Lens Mount
Selectable C-/CS-mount
Ambient Operating
Temperature
10°F – 122°F (-10°C – +50°C)
Ambient Operating
Humidity
Less than 90%
Power Source/
WV-CP230: 120VAC, 4.1W
Consumption
WV-CP232: 12VDC, 300mA
WV-CP234: 24VAC, 4.1W
Dimensions
2
9
⁄
16
"H x 2
5
⁄
8
"W x 4
13
⁄
16
"D
(65 x 67 x 123m) (without lens)
Weight
WV-CP230: 1.4 lbs. (0.62g)
WV-CP232: 0.98 lbs. (0.445g)
WV-CP234: 1.04 lbs. (0.470g)
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
ARCHITECTS’ AND ENGINEERS’ BID SPECIFICATIONS
Switch Controls For WV-CP230/CP234
Sync selection switch (LL/INT)
Electronic Light Control/Automatic Light Control selection switch (ELC/ALC)
Detail level selection switch (SOFT/SHARP)
Back light compensation on/off switch (BLC on/off)
Lens selection switch (VIDEO/DC)
Switch Controls For WV-CP232
Electronic Light Control/Automatic Light Control selection switch (ELC/ALC)
Detail level selection switch (SOFT/SHARP)
Back light compensation on/off switch (BLC on/off)
Lens selection switch (VIDEO/DC)
