background image

Camera

Pick-up Device:

512 (H) x 582 (V) pixels, Interline Transfer CCD

Scanning Area:

3.61 (H) x 2.70 (V) mm (Equivalent to scanning area of 1/4” 
pick-up tube)

Scanning System:

2 : 1 interlace

Scanning:

625 lines / 50 fields / 25 frames

Horizontal:

15.625 kHz

Vertical:

50 Hz

Synchronization:

Internal

Video Output:

1.0 V[p-p] composite 75 

(Standard RCA type pin plug)

Horizontal Resolution:

WV-CF420:

330 lines at centre

WV-BF320:

380 lines at centre

Signal-to-Noise Ratio:

46 dB (AGC OFF, weight ON)

Minimum Illumination:

WV-CF420: 10 lx (1.0 foot-candle) at F2.8
WV-BF320: 0.5 lx (0.05 foot-candle) at F2.8

Automatic Gain Control (AGC):

+15 dB preset

Electronic Light Control (ELC):

Equivalent to continuous variable shutter speed between 
1/50 s and 1/96 000 s

White Balance (WV-CF420 only):

ATW (Automatic Tracing White Balance) preset

Angular Field of View:

Horizontal; 45˚, Vertical; 34˚

Power Requirement:

6 V DC 0.2 A by exclusive AC adapter model A20620GPA

Ambient Operating Temperature:

10°C - +50°C (14°F - 122°F)

Ambient Operating Humidity:

Less than 90 %

Dimensions:

φ

129 x 46.5 mm [

φ

5-1/16” x 1-13/16”]

Weight:

160 

g

[0.35 lbs]

AC Adapter

Input:

230 V AC 50 Hz

Output:

6 V DC, 0.2 A, 1.2 VA

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

Note:

Noise may appear in the monitor images when the camera is used under high-temperature

and low-light conditions.

STANDARD ACCESSORY

AC Adapter .......................................................................................1

SPECIFICATIONS

Matsushita Electric Industrial Co., Ltd.

Central P.O. Box 288, Osaka 530-91, Japan

Summary of Contents for WVCF420 - CCTV

Page 1: ...gle is interned to alert the user to the presence of uninsulated dan gerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE The serial number of this product may be found on the top of the unit You should note the serial numb...

Page 2: ...be installed proceed as follows 1 Determine the place on the ceiling where you want to install the camera Then make a hole approx φ15 mm in the ceiling referring to the diagram at right 2 Detach the panel cover by rotating it coun terclockwise 3 Pass the cables through the cable hole 4 Connect the cables as shown in the dia gram 5 Mount the camera onto the ceiling by fix ing it with the mounting s...

Page 3: ...the diagram and tighten it with the two screws Caution Confirm that the direction of the camera shown in the diagram coin cides with the top of the image dis played on the monitor screen Tilt the camera until protrusions of the camera fit into these grooves in the screw hole This camera can pick up images through the holes on both sides of the panel cover This requires moving the position of the c...

Page 4: ...rol ELC Equivalent to continuous variable shutter speed between 1 50 s and 1 96 000 s White Balance WV CF420 only ATW Automatic Tracing White Balance preset Angular Field of View Horizontal 45 Vertical 34 Power Requirement 6 V DC 0 2 A by exclusive AC adapter model A20620GPA Ambient Operating Temperature 10 C 50 C 14 F 122 F Ambient Operating Humidity Less than 90 Dimensions φ129 x 46 5 mm φ5 1 16...

Reviews: