13
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for
a long period of time, the grease coating inside
these parts may become sticky. That may
obstruct the parts from moving. To prevent
this, move the lens or pan/tilt head periodically.
Or perform position refresh periodically in the
manner described in “Position refresh”.
Position refresh
During the use for a long period of time, the
preset positions may become inaccurate. When
“Position refresh” is set for the created schedule,
the camera position will be corrected periodically.
Refer to the Operating Instructions on the provided
CD-ROM for how to perform the settings.
Tilt angles and the zoom ratio
This product contains a function to prevent
image deterioration when using a tilt angle
higher than horizontal (0 ° to –15 °). However,
when this product is used at a tilt angle higher
than about –5 °, depending on the zoom rate
used, images may become distorted or the
upper parts of the images may become dark.
In this case, adjust the zoom rate or tilt angle
as necessary.
Equipment classification and power
source indication label
Remove the main sunshield rear cover of this
product to refer to the indication label for the
equipment classification and power source, etc.
Product disposal/transfer
Data saved on this product or a storage device
used with this product may lead to personal
information leakage. When it is necessary to
dispose or give this product to someone, even
when for repair, make sure that there is no data
on this product.
When abandoning the memory media, it is rec-
ommended to destroy it physically after delet-
ing data by PC.
Meaning of symbols
: Direct current symbol
: Alternating current symbol
