26
When removing an SD memory card, reverse the procedure.
• Before removing the SD memory card, make sure to select “Not use” for “SD memory card” on
the [SD memory card] tab of “Basic” page on the setup menu first. (
☞
Operating Instructions
(included in the CD-ROM))
■
Remove an SD memory card
Note:
• When using an SD memory card, format it using this product. Recorded data on the SD memory
card will be deleted when formatted. If an unformatted SD memory card or an SD memory card for-
matted with other devices is used, this product may not work properly or performance deterioration
may be caused. Refer to the Operating Instructions on the provided CD-ROM for how to format an
SD memory card.
• When some SD memory cards are used with this product, the product may not work properly or
performance deterioration may be caused. Use the compatible SD memory cards. (
☞
Step 5
Perform Step
3
→
Step
1 in reverse order.
Remount the water-resistant cap and mount
the main sunshield rear cover in their original
location.
Recommended tightening torque of the water-
resistant cap locking screws:
0.69 N·m {0.51 lbf·ft}