![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972128.webp)
Note
•
The following are the camera operations that can be learned.
–
Start position operations
pan/tilt/zoom/focus position
–
Camera operations
pan/tilt/zoom/focus position/moving the preset position
•
The auto focus function cannot be used when performing patrol operations. As a characteristic of zoom
lenses, when images are zoomed up from the “Wide” side, they may become blurred. When learning
zoom operations, starting from the “Tele” side will reduce blurring.
[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button
Refer to Page 15 for descriptions of how to operate these buttons/pad.
[Close] button
Click this button to close the “Patrol” setup menu.
2.5.5.6 Configure the settings relating to auto track (“Auto track” setup
menu)
Click the [Setup>>] button of “Auto track” on the [Image/Position] tab of the “Image/Audio” page
(
Here, the information related to the auto track setting is set.
Note
•
The auto-track setup is not available under the following conditions:
–
When “Image capture mode” is set to “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9]
(60fps mode)”
–
When “On” is selected for “Stabilizer”
–
When other than “Off” is selected for “Smart Facial Coding” of “Smart Coding” for “Stream(1)”
–
When “Maximum shutter” of “Image adjust” - “Light control mode” is the following:
Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.10/30s/ Max.16/30s
128
Operating Instructions
2 Settings