Panasonic WV-X6511N Operating Instructions Manual Download Page 107 | Manualshive

Page: 107 / 265

Panasonic WV-X6511N Operating Instructions Manual Download Page 107

2.5.5 Configure the settings relating to images and the preset
positions [Image/Position]

Click the [Image/Position] tab on the “Image/Audio” page. (

®

For menu display and how to operate, refer to

page 47, page 48)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image/Position] tab.
The settings relating to image adjust, preset positions, auto panning, patrol, auto-tracking, direction/angle,
privacy zone, and VIQS can be configured in this section.

[Image adjust]

Click the [Setup>>] button to display the setup menu that can configure the settings relating to image quality.
The setup menu will be displayed in a newly opened window. (

®

[Preset position]

Click the [Setup>>] button to display the setup menu that can configure the preset position. The setup menu
will be displayed in a newly opened window. (

Operating Instructions

107

2 Settings

«
...
105
106
107
108
109
...
»

Summary of Contents for WV-X6511N










































































































































































































































































Reviews:

No comments