Panasonic WV-V1330L1 Operating Instructions Manual Download Page 69

Page: 69 / 93

Parameter

Function

Anti-dither

System only memorizes one event during the anti-dither period.

The value ranges from 0s to 100s.

Record

System auto activates motion detection channel to record once

alarm occurs (working with motion detection function).

Record Delay System can delay the record for specified time after alarm ended.

The value ranges from 10s to 300s.

Relay out

Enable alarm activation function. You need to select alarm output

port so that system can activate corresponding alarm device when

alarm occurs.

Alarm delay

System can delay the alarm output for specified time after alarm

ended. The value ranges from 10s to 300s.

Send Email

After this function is enabled, system can send out email to alert

you when alarm occurs and ends.

Snapshot

After you enabled snapshot, the system will automatically

snapshot if alarm occurs.

Abnormity (except WV-V1330LK)

6.4.4

Abnormity includes No SD Card, SD Card Error and Capacity Warning.
Note:
Device without SD card function does not have the above three statuses.
See Figure 6-38 to Figure 6-40.

Figure 6-38

Summary of Contents for WV-V1330L1






























































































Search results

Summary of Contents for WV-V1330L1

Reviews:

Related manuals for WV-V1330L1

Brands by name

Popular brands

Panasonic WV-V1330L1, Operating Instructions Manual

Search results

Summary of Contents for WV-V1330L1

Reviews:

Related manuals for WV-V1330L1

Brands by name

Popular brands