background image

Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
“9 Low” for “Image quality setting” of “JPEG” (

®

page 83) may sometimes solve this problem.

Depending on the cellular phone in use or its contract plan, it may be impossible to access.

*1

IP address is the global WAN IP address of the router that can be accessed via the Internet.

*2

When “User auth.” is set to “On” (

®

page 151), only users with the access level of “1. Administrator” or “2. Camera control” will be

displayed.

2.2  Monitor images on a mobile terminal

It is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEG
only) from the camera on the screen of the mobile terminal. Images are refreshed automatically to display the
latest image.
The compatible mobile terminals are shown as follows. (As of February, 2013)

iPad, iPhone, iPod touch (iOS 4.2.1 or later)

Android™ mobile terminals

When an Android terminal is used, an MJPEG format image is displayed by the Firefox

®

 browser, but a JPEG

format image is displayed by the standard browser.
For further information about compatible devices, refer to our website
(http://security.panasonic.com/pss/security/support/info.html).

IMPORTANT

When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (

®

page 151)

When “2 mega pixel [16:9]” is selected for “Image capture mode”, the maximum image capture size is
640x360.

Note

It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the camera. (

®

page 161)

20

Operating Instructions

2 Monitor images on a cellular phone/mobile terminal

Summary of Contents for WV-SW598





































































































































































































































Reviews: