Precautions
Refer installation work to the dealer.
Installation work requires technique and experience.
Failure to observe this may cause fire, electric shock,
injury, or damage to the product.
Be sure to consult the dealer.
Stop the operation immediately when something is
wrong with this product.
When smoke goes up from the product, the smell of
smoke comes from the product, or the exterior of the
product has deteriorated, continued use will cause a fire
or fall of the product resulting in injury, or damage to the
product.
In this case, turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify this prod-
uct.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Do not insert any foreign objects.
Fire or electrical shock may be caused if water or any for-
eign objects, such as metal objects, enter inside the unit.
Turn the power off immediately and contact qualified ser-
vice personnel for service.
Select an installation area that can support the total
weight.
Selecting an inappropriate installation surface may cause
this product to fall down or topple over, resulting in injury
or accidents.
Installation work shall be started after sufficient reinforce-
ment.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause a fall of the
product resulting in injury or accidents.
Consult the dealer for the inspections.
Do not use this product in an inflammable atmo-
sphere.
Failure to observe this may cause an explosion resulting in
injury.
Avoid installing this product in the locations where
salt damage occurs or corrosive gas is produced.
Otherwise, the mounting portions will deteriorate and acci-
dents such as a fall of the product may occur.
The measures of protection against a fall of this
product shall be taken.
Failure to observe this may cause a drop resulting in injury
or accidents.
Be sure to install the safety wire.
The exclusively designed mount bracket shall be
used.
Failure to observe this may cause a drop resulting in injury
or accidents.
Use the exclusively designed mount bracket for installation.
The screws and bolts must be tightened to the
specified torque.
Failure to observe this may cause a drop resulting in injury
or accidents.
Do not install this product in locations subject to
vibration.
Loosening of mounting screws or bolts may cause a fall of
the product resulting in injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause fire or injury.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. In addi-
tion, short circuit or wrong wiring may cause fire.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Do not touch the main body while this product is
panning/tilting.
Fingers may be caught up in the moving part, and that
may result in injury.
Keep SDXC/SDHC/SD memory cards away from
infants and children.
Otherwise, they may swallow the cards by mistake.
In this case, consult a doctor immediately.
Do not install or clean the camera, or touch this
product, the power cable or the connected cables
during thunder storms.
Failure to observe this may cause electric shock.
Install this product in a location high enough to
avoid people and objects from bumping the product.
Failure to observe this may cause injury.
Do not hang down from this product or use this
product as a pedestal.
Failure to observe this may cause a drop resulting in acci-
dents.
9
