33
t
Attach the base cover (accessory) that was
removed according the steps in page 20.
y
Use the bit for tamperproof screw (accessory)
to tighten the fixing screws provided on both
sides of the base cover (accessory).
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
x
Detach the enclosure from the main
body by loosening the three fixing
screws.
Loosen the three fixing screws by using the bit
for tamperproof screw (accessory).
Detach the inner dome while pushing toward
the directions as indicated by the arrows in the
illustration.
IMPORTANT:
• Do not hold the inner dome when carrying the
camera. Otherwise, the camera part may fall
and it may damage the camera.
• Because the inner dome is non-detachable, do
not detach it when installing this product.
• Remove the cover film from the transparent part
of the dome cover after the installation is com-
plete. Do not touch the dome cover by hand
directly after removing the cover film.
Base cover fixing screw
Base cover
(accessory)
Summary of Contents for WV-SW558
Page 51: ...51 ...
