manualshive.com logo in svg

Panasonic WV-SW558, Installation Manual

Share
Download
Panasonic WV-SW558 Installation Manual Download Page 50

50

Installation Guide (this document) ......................................................1 pc.
Warranty card (P model only) .............................................................1 pc.
CD-ROM*

1

 ........................................................................................1 pc.

Code label*

2

 ......................................................................................1 pc.

The following parts are used during installation procedures.
4P alarm cable ..................................................................................1 pc.
Camera attachment ...........................................................................1 pc.
2P power cable .................................................................................1 pc.
Fixing screws (M4 x 8 mm) .............................5 pcs. (of them, 1 for spare)
Base cover ........................................................................................1 pc.
Mount bracket ...................................................................................1 pc.
Bit for tamperproof screw ..................................................................1 pc.
Waterproof tape .................................................................................1 pc.

  *1  The CD-ROM contains the operating instructions and different kinds of tool software programs. 
  *2  This label may be required for network management. The network administrator shall retain the 

code label. 

Standard accessories

Ceiling mount bracket ..................................................WV-Q169
Smoke Dome Cover ....................................................WV-CW4S
User License Accessory (For H.264) ............................ BB-HCA8A (P model) 

BB-HCA8CE (E model, Korea)* 
* Required in Korea

Optional accessories

Summary of Contents for WV-SW558





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands