background image

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is 

intended to alert the user to the presence 

of uninsulated "dangerous voltage" within 

the product's enclosure that may be of 

sufficient magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an equilater-

al triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

•  Apparatus shall be connected to a mains sock

et outlet with 

a protective earthing connection.

•  The mains plug or an appliance coupler shall remain readily 

operable.

•  The apparatus should not be exposed to dripping or 

splashing and that no objects filled with liquids, such as 

vases, should be placed on the apparatus.

•  All work related to the installation of this product should be 

made by qualified service personnel or system installers.

•  For PERMANENTLY CONNECTED APPARATUS provided 

neither with an all-pole MAINS SWITCH nor an all-all pole 

circuit breaker, the installation shall be carried out in accor-

dance with all applicable installation rules.

•  The connections should comply with local electrical code.

Power disconnection. Unit with or without ON-OFF switch-

es have power supplied to the unit whenever the power 

cord is inserted into the power source; however, the unit is 

operational only when the ON-OFF switch is in the ON 

position. Unplug the power cord to disconnect the main 

power for all units.

The model number and serial number of this product 

may be found on the surface of the unit.

You  should  note  the  model  number  and  serial  number 

of this unit in the space provided and retain this book as 

a permanent record of your purchase to aid identifica-

tion in the event of theft.

 

Model No. 

  Serial No.

NOTE: This equipment has been tested and found to 

comply with the limits for a Class A digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and 

used in accordance with the instruction manual, may 

cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely 

to cause harmful interference in which case the user will 

be required to correct the interference at his own 

expense.

FCC Caution: To assure continued compliance, (example 

- use only shielded interface cables when connecting to 

computer or peripheral devices). Any changes or modifi-

cations not expressly approved by the party responsible 

for compliance could void the user’s authority to operate 

this equipment.

For U.S.A

For U.S.A

This Class A digital apparatus complies with Canadian ICES-

003.

For Canada

UL listed model No.

WV-SW396/WV-SW395

For U.S. and Canada:

WV-SW396/WV-SW395

For Europe and other countries:

WV-SW396E/WV-SW395E

This product contains a CR Coin Cell Lithium Battery which 

contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

We declare under our sole responsibility that the product to which 

this declaration relates is in conformity with the standard or other 

normative document following the provisions of Directive 2004/108/

EC.

Wij verklaren als enige aansprakelijke, dat het product waarop deze 

verklaring betrekking heeft, voldoet aan de volgende norm of ander 

normatief dokument, overeenkomstig de bepalingen van Richtlijn 

2004/108/EC.

Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das 

sich diese Erklärung bezieht, mit der folgenden Norm oder 

normativen Dokument übereinstimmt. Gemäß den Bestimmungen 

der Richtlinie 2004/108/EC.

Vi erklærer os eneansvarlige for, at dette produkt, som denne 

deklaration omhandler, er i overensstemmelse med standard eller 

andre normative dokumenter i følge bestemmelserne i direktiv 

2004/108/EC.

Nous déclarons sous notre propre responsabilité que le produit 

auquel se réfère la présente déclaration est conforme á la norme 

spécifiée ou à tout autre document normatif conformément aux 

dispositions de la directive 2004/108/CE.

Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken 

denna deklaration hänvisar är i överensstämmelse med 

standarddokument eller annat normativt dokument som framställs i 

direktiv 2004/108/EC.

Nosotros declaramos bajo nuestra única responsabilidad que el 

producto a que hace referencia esta declaración está conforme con 

la norma u otro documento normativo siguiendo las estipulaciones 

de la directiva 2004/108/CE.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä 

ilmoitus koskee, noudattaa seuraavaa standardia tai muuta 

ohjeellista asiakirjaa, jotka noudattavat direktiivin 2004/108/EC 

säädöksiä.

Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto 

a cui si riferisce la presente dichiarazione risulta conforme al 

seguente standard o altro documento normativo conforme alle 

disposizioni della direttiva 2004/108/CE.

Vi erklærer oss alene ansvarlige for at produktet som denne 

erklæringen gjelder for, er i overensstemmelse med følgende norm 

eller andre normgivende dokumenter som følger bestemmelsene i 

direktiv 2004/108/EC.

For Europe

2

Summary of Contents for WV-SW396









































Reviews: