A
B
C
D
Configuring the HTTPS connection (
®
Generation of the CRT key (SSL encryption key) (
®
Generation of CSR (Certificate Signing Request) (
®
Installation of the server certificate (
®
Note
•
To use the CA certificate, you need to apply for the approval and the issue of server certificate by CA.
12.3.1 Configuration of HTTPS connections
1.
Select “HTTPS” to access the camera in [HTTPS – Connection].
2.
Select the certificate to be used with HTTPS with [HTTPS – Select certificate].
•
When using a pre-installed certificate:
Select “Pre-installed”.
•
When using a CA certificate:
Select “CA”.
Note
•
“CA” can only be selected when a CA certificate has been added. Refer to page 144 for information
on how to add a CA certificate.
3.
Designate the HTTPS port number to be used for [HTTPS – HTTPS port].
•
Available port number:
1 - 65535
•
Default:
443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 - 61000
4.
Click the [Set] button.
→
It will become possible to access to the cameras using the HTTPS protocol.
Refer to the following for information on methods to access cameras using HTTPS.
•
When using a pre-installed certificate:
•
When using a CA certificate:
•
Monitor images on a PC:
•
Monitor images on a cellular phone:
•
Monitor images on a mobile terminal:
Operating Instructions
145
12 Configuring the network settings [Network]
