40
•
Basic
WV-SPW631LT/WV-SPW631L/
WV-SPW611L
WV-SPW611
Power source*
1
:
12 V DC±10 %, PoE (IEEE802.3af compliant: DC36-57 V)
Power consumption*
1
:
(PoE: Class 0 device)
DC power supply:
12 V DC/1080 mA/Approx. 12.9 W
PoE Device:
48 V DC/360 mA/Approx. 12.95 W
DC power supply:
12 V DC/670 mA/Approx. 8.1 W
PoE Device:
48 V DC/230 mA/Approx. 11.1 W
Ambient operating environ-
ment:
–40 °C to +50 °C
{–40 °F to 122 °F}*
2
Ambient operating humidity: 10 % to 90 % (no condensation)
IR LED irradiation distance:
30 m {98.43 feet}
–
Monitor output (for adjust-
ment):
VBS: 1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack (monaural)
An NTSC or PAL monitor can be connected to the camera
(use the selector switch or software to select the monitor type).
MONITOR OUT conversion plug included
(ø3.5 mini-jack
⇔
RCA jack)
External I/O terminals:
ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/
ALARM IN 3 (AUX OUT) (x1 each)
DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used by
changing the settings of Terminal 1, Terminal 2, and Terminal 3.
Microphone/line input:
ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
For microphone input:
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V±0.5 V
Recommended sensitivity of microphone: –48 dB±3 dB
(0 dB=1 V/Pa, 1 kHz)
For line input:
Input level: Approx. –10 dBV
Audio output:
ø3.5 mm stereo mini jack (monaural output)
Output impedance: Approx. 600 Ω (unbalanced)
External speaker with an amplifier
Output level: -20 dBV
Waterproof*
3
:
Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliant
Dimensions:
94 mm (W) x 89 mm (H) x 226 mm (L) {3-45/64 inches (W) x
3-1/2 inches (H) x 8-57/64 inches (L)}
Mass:
Approx. 1.4 k
g
{3.09 lbs}
Finish:
Main body: Aluminum die cast (Light gray)
Dome cover: Clear polycarbonate resin
*1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further infor-
mation about Power source and Power consumption information.
*2 When using this product without turning the power off. (However, the temperature inside the
camera shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the
ambient temperature is -30 °C {-22 °F} or higher. The auto focus function is not available until
the heater unit of the camera raises the internal temperature of the camera.
*3 Only when installation work is properly performed according to the instructions in this book and
appropriate waterproof treatment is performed.
Specifications