Panasonic WV-SPW611 Installation Manual Download

Page: 39 / 48

Symptom

Cause/solution

Reference

pages

The LINK indicator does
not light in orange even
when the network cable
is connected to the
camera.

• Is the LAN cable connected appropriately?

→

Connect the LAN cable appropriately.

• Is the hub or router connected to the camera

operating appropriately?

→

Check if the hub or router in use is operat-

ing appropriately.

• Isn't the LAN cable connected to the camera

broken?

→

Replace the cable with another one.

22-24

AF/SD ERROR indicator
lights red or blinks red.

• Isn’t the write protect switch of the inserted SD

memory card set to “LOCK”?

→

Unlock the write protect switch of the SD

memory card.

• Hasn't the inserted SD memory card been for-

matted on a PC?

→

Use an SD memory card formatted on the

camera.

Or install the software to format the SD

memory card on the PC. Refer to our
website (http://security.panasonic.com/
pss/security/support/info.html) for further
information about the supported software.

• Isn't the inserted SD memory card faulty?

→

Replace the card with a normal one.

Operating

Instructions

(included in

the CD-ROM)

Summary of Contents for WV-SPW611

















































Search results

Summary of Contents for WV-SPW611

Reviews:

Related manuals for WV-SPW611

Brands by name

Popular brands

Panasonic WV-SPW611, Installation Manual

Search results

Summary of Contents for WV-SPW611

Reviews:

Related manuals for WV-SPW611

Brands by name

Popular brands