![background image](http://html.mh-extra.com/html/panasonic/wv-spn6r481/wv-spn6r481_operating-instructions-manual_1511936005.webp)
5
Installations
The following mounting descriptions use model WV-SPN631 as a representative example to explain
the mounting process.
Read the following descriptions together with the Installation Guide of the respective camera before
attempting to mount the camera.
Step1 Remove the rear option cover fastening screw on the top of
the camera, the rear option cover and the 2 screws located
on the upper backside of the camera.
z
Remove the rear option cover fastening screw (binding head screw: M2.5 x 5 mm {1/4 inches})
on the top of the camera.
x
Remove the rear option cover by inserting a flat-headed object (such as a small screwdriver)
into the groove on the left side (when viewed from behind) on the top of the camera body.
c
Remove the top 2 screws (binding head screw: M2.5 x 5 mm {1/4 inches}) from the back panel
of the camera.
Note:
• Store the removed screws (binding head screw: M2.5 x 5 mm {1/4 inches}) and rear option
cover in a safe location for when you choose to remove the RS485 Output unit, as they will not
be used from this point onwards.
Rear option cover fastening screw
Rear option cover
Back panel
Screws x 2
Slot