background image

4

This is the RS485 Output unit for the WV-SPN6 series.
It will be referred to as RS485 Output unit from here on.

Features

Precautions

Refer installation work to the dealer.

Installation work requires technique and experi-
ences.
Failure  to  observe  this  may  cause  fire,  electric 
shock, injury, or damage to the product.
Be sure to consult the dealer.

Turn the power off when do wiring of this 
product.

Failure  to  observe  this  may  cause  electric 
shock. In addition, short circuit or wrong wiring 
may cause fire.

The screws and bolts must be tightened to 
the specified torque.

Loosening  of  mounting  screws  or  bolts  may 
cause a fall of the product resulting in injury or 
accidents.

Stop the operation immediately when 
something is wrong with this product.

When  smoke  goes  up  from  the  product,  the 
smell of smoke comes from the product, or the 
exterior  of  the  product  has  deteriorated,  con-
tinued use will cause a fire or fall of the product 
resulting in injury, or damage to the product.
In  this  case,  turn  the  power  off  immediately 
and contact qualified service personnel for ser-
vice.

Do not insert any foreign objects.

Fire or electrical shock may be caused if water 
or  any  foreign  objects,  such  as  metal  objects, 
enter inside the unit.
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service.

Do not attempt to disassemble or modify 
this product.

Failure to observe this may cause fire or elec-
tric shock.
Consult the dealer for the repair or inspections.

Correctly perform all wiring.

Short  circuits  in  the  wiring  or  incorrect  wiring 
may cause fire or electrical shock.

Do not install or clean the camera, or 
touch this product, the power cable or the 
connected cables during thunder storms.

Failure  to  observe  this  may  cause  electric 
shock.

Turn the power off when cleaning this 
product.

Failure to observe this may cause injury.

Summary of Contents for WV-SPN6R481

















Reviews: