15
Step 12 Configure the settings of the IR LED and perform an
operational check.
z
Select the [Front unit] tab on the [Extension unit] page of the setup menu.
Setup items
Setup contents and defaults
Automatic detection
Control whether or not to auto detect the IR LED Unit by select-
ing On/Off.
Default: On
Additional function
Select an extension unit to use. This can only be done when
"Automatic detection" is turned "Off".
• When turning on the camera after the IR LED unit is installed, the IR LED unit will automati-
cally be recognized and [IR LED] will be displayed in the [Additional function] settings.
* "Off" is displayed if the unit fails to correctly recognize the IR LED unit.
Check again that the connectors of the IR LED unit and the camera are properly con-
nected and turn on the camera again.
x
Click [Image adjust] in IR LED.
c
Configure the settings according to your operation preferences when the image quality adjust-
ment screen (page 16) is displayed. For more information, refer to the Operating Instructions of
the camera.
