13
c
Select the unit you want to configure, and click [Access Camera].
Note:
• When more than one unit is displayed in [Panasonic IP Setting Software] screen, click the
unit with the same MAC address as the MAC address printed on the unit that you want to
configure.
v
If the installation screen of the viewer software “Network Camera View 4S” is displayed, follow
the instructions of the wizard to start the installation. (The viewer software is installed from the
camera.)
• The “Live” page will be displayed.
• If you cannot install the viewer software “Network Camera View 4S” or if images are not dis-
played, click the [Install] button next to [Viewer Software] on the launcher window to install
the software. When no image is displayed on the “Live” page, refer to the Operating
Instructions on the CD-ROM provided with the camera.
• Set your browser to compatibility view if no image is displayed.
Please refer to the Panasonic support website listed below for more information about con-
figuration methods.
http://security.panasonic.com/pss/security/support/info.html
