manualshive.com logo in svg

Panasonic WV-SPN311, Operating Instructions Manual

Share
Download
Panasonic WV-SPN311 Operating Instructions Manual Download Page 192

The status of this camera can be checked on this page.

[Viewnetcam.com]

•

Server:

 The URL of the “Viewnetcam.com” service server will be displayed.

•

Status:

 The registration status for the “Viewnetcam.com” will be displayed.

•

Personal(Camera) URL:

 The URL of the camera registered for “Viewnetcam.com” will be displayed.

[UPnP]

•

Port number(HTTP), Port number(HTTPS):

 The port number that is set for UPnP port forwarding will be

displayed.

•

Status:

 The port forwarding status will be displayed.

•

Router global address:

 The global address of router will be displayed.

[Self check]

The self check result of the hardware will be displayed.

Note

•

Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further
information about the contents of the displayed statuses (relating to the “Viewnetcam.com” service,
the UPnP function, or the self check).

18.4  Reset the settings/Reboot the camera [Default
reset]

Click the [Default reset] tab of the “Maintenance” page. (

®

page 41, page 43)

192

Operating Instructions

18 Maintenance of the camera [Maintenance]

Summary of Contents for WV-SPN311



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands