background image

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert 

the user to the presence of 

uninsulated "dangerous volt-

age" within the product's enclo-

sure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an 

equilateral triangle is intended 

to alert the user to the presence 

of important operating and 

maintenance (servicing) instruc-

tions in the literature accompa-

nying the appliance.

WARNING:

•  Apparatus shall be connected to a mains sock-

et outlet with a protective earthing connection.

•  The mains plug or an appliance coupler shall 

remain readily operable.

•  To prevent fire or electric shock hazard, do not 

expose this apparatus to rain or moisture.

•  The apparatus should not be exposed to drip-

ping or splashing and that no objects filled 

with liquids, such as vases, should be placed 

on the apparatus.

•  All work related to the installation of this prod-

uct should be made by qualified service per-

sonnel or system installers.

•  For PERMANENTLY CONNECTED 

APPARATUS provided neither with an all-pole 

MAINS SWITCH nor an all-all pole circuit 

breaker, the installation shall be carried out in 

accordance with all applicable installation 

rules.

•  The connections should comply with local 

electrical code.

The serial number of this product may be found 

on the surface of the unit.

You  should  note  the  model  number  and  serial 

number  of  this  unit  in  the  space  provided  and 

retain this book as a permanent record of your 

purchase  to  aid  identification  in  the  event  of 

theft.

 

Model No. 

 

Serial No.

NOTE:  This  equipment  has  been  tested  and 

found to comply with the limits for a Class A digi-

tal device, pursuant to Part 15 of the FCC Rules. 

These  limits  are  designed  to  provide  reasonable 

protection against harmful interference when the 

equipment  is  operated  in  a  commercial  environ-

ment.  This  equipment  generates,  uses,  and  can 

radiate radio frequency energy and, if not installed 

and used in accordance with the instruction man-

ual, may cause harmful interference to radio com-

munications.

Operation of this equipment in a residential area 

is  likely  to  cause  harmful  interference  in  which 

case the user will be required to correct the inter-

ference at his own expense.

FCC  Caution:  To  assure  continued  compliance, 

(example  -  use  only  shielded  interface  cables 

when  connecting  to  computer  or  peripheral 

devices).  Any  changes  or  modifications  not 

expressly  approved  by  the  party  responsible  for 

compliance  could  void  the  user’s  authority  to 

operate this equipment.

For U.S.A

For U.S.A

This Class A digital apparatus complies with 

Canadian ICES-003.

For Canada

Power disconnection. Unit with or without ON-OFF 

switches have power supplied to the unit whenev-

er the power cord is inserted into the power 

source; however, the unit is operational only when 

the ON-OFF switch is in the ON position. Unplug 

the power cord to disconnect the main power for 

all units.

UL listed model No.

WV-SP105, WV-SP102

Summary of Contents for WV-SP105





































Reviews: