![background image](http://html.mh-extra.com/html/panasonic/wv-sfn310/wv-sfn310_operating-instructions-manual_277999127.webp)
13.7.1 Configure the settings relating to Panasonic alarm protocol
Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–
When an alarm is detected (“Alarm”)
–
When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–
When the SD memory card has become full (“Diag.”)
–
When the SD memory card cannot be recognized (“Diag.”)
•
Default:
Off
Note
•
When “On” is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
Operating Instructions
127
13 Configure the alarm settings [Alarm]
Summary of Contents for WV-SFN310
Page 209: ...Operating Instructions 209 Notes ...