manualshive.com logo in svg

Panasonic WV-SF538, Operating Instructions Manual

Share
Download
Panasonic WV-SF538 Operating Instructions Manual Download Page 78

[Log] tab

[SD memory card] tab

Logs and associated images

Manual/

Schedule:

Save logs

SD memory

card

Save trigger

Overwrite

Off

Use

Manual/
Schedule

On

•

Logs:

 Will not be saved.

•

Images:

 Will be saved. When the

remaining capacity of the SD memory card
becomes insufficient, the older images will
be overwritten by the newer images.
*To display images on the SD memory
card, it is necessary to copy them onto the
PC first. (

®

page 65)

Off

•

Logs:

 Will not be saved.

•

Images:

 Will be saved. When available

capacity of the SD memory card ran out,
saving of images will become impossible.
*To display images on the SD memory
card, it is necessary to copy them onto the
PC first. (

®

page 65)

Other than
“Manual/
Schedule”

-

•

Logs:

 Will not be saved.

•

Images:

 Will not be saved.

Not use

-

-

•

Logs:

 Will not be saved.

•

Images:

 Will not be saved.

78

Operating Instructions

10 Configure the basic settings of the camera [Basic]

Summary of Contents for WV-SF538

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands