manualshive.com logo in svg

Panasonic WV-SF538, Operating Instructions Manual

Share
Download
Panasonic WV-SF538 Operating Instructions Manual Download Page 192

21   Using the CD-ROM

21.1  About the CD launcher

By inserting the provided CD-ROM into the CD-ROM drive of your PC, the CD launcher is automatically started
and the license agreement is displayed. Read the agreement and select “I accept the terms in the license
agreement”, and then click “OK”.
The CD launcher window is displayed.

•

If the launcher window is not displayed, double click the “CDLauncher.exe” file on the CD-ROM.

A

C

D

E

B

Using the supplied CD-ROM, the following actions can be performed.

The Panasonic “IP Setting Software” can be installed on the PC. (

®

page 193)

Settings related to the camera’s network can be set from the Panasonic “IP Setting Software”.
(

®

page 195)

The manuals can be installed on the PC. (

®

page 194)

You can also view the manuals without installing them to the PC by clicking the [Open] button.
The Viewer software can be installed on the PC. (

®

page 194)

Make sure to read the [Readme] file on the provided CD-ROM before using the software.

192

Operating Instructions

21 Using the CD-ROM

Summary of Contents for WV-SF538

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands