Panasonic WV-SF538 Operating Instructions Manual Download Page 33

Page: 33 / 216

6 Display the log list (WV-SW559/WV-SP509/

WV-SF549/WV-SF539)

The history of various logs will be displayed in list form.
The display format varies depending on the “Recording format” of the SD memory card.

6.1 When “JPEG” is selected for “Recording
format” of the SD memory card

The history of the following logs will be displayed in list form.

•

Alarm log:

Logs of the alarm occurrences such as time and date of the alarm occurrences and the alarm

type will be displayed.

•

Manual/Schedule log:

Logs filed when images have been recorded manually or during the period of the

schedule on the SD memory card will be displayed.

•

FTP trans. error log:

Logs filed when the FTP periodic image transmission function has failed will be

displayed.

Each log list can be displayed only when “On” is selected for “Save logs” on the [Log] tab of the “Basic” page
(

page 74) respectively.

Display the “Live” page. (

page 8)

Operating Instructions

6 Display the log list (WV-SW559/WV-SP509/WV-SF549/WV-SF539)

Summary of Contents for WV-SF538

























































































































































































































Search results

Summary of Contents for WV-SF538

Reviews:

Brands by name

Popular brands

Panasonic WV-SF538, Operating Instructions Manual

Search results

Summary of Contents for WV-SF538

Reviews:

Brands by name

Popular brands