Panasonic WV-SF530 Series Operating Instructions Manual Download Page 43

Page: 43 / 216

Select the image to be downloaded, and then click the [OK] button.

•

All:

All images saved at the selected time and date will be downloaded.

•

Current image:

Only the currently displayed image will be downloaded.

•

Download range:

Images in the designated range of number of images will be downloaded.

Note

•

When the [Cancel] button is clicked in the process of the download, the download will be canceled. In
this case, images already downloaded before clicking the [Cancel] button will be saved on the PC.

[Browse] button

When successfully logged in after the user authentication process, a folder on the SD memory card in which
images are saved will be displayed. (

page 66)

Operating Instructions

7 Playback of images on the SD memory card (WV-SW559/WV-SP509/WV-SF549/WV-SF539)

Summary of Contents for WV-SF530 Series

























































































































































































































Search results

Summary of Contents for WV-SF530 Series

Reviews:

Related manuals for WV-SF530 Series

Brands by name

Popular brands

Panasonic WV-SF530 Series, Operating Instructions Manual

Search results

Summary of Contents for WV-SF530 Series

Reviews:

Related manuals for WV-SF530 Series

Brands by name

Popular brands