Symptom
Cause/solution
Reference
pages
Live indicator keeps on
blinking orange approx. in 2
seconds intervals.
• UPnP
TM
error has occurred since the power is not supplied to the
router.
Turn on the power of the router. Wait until the connections are
established.
−
• An error has occurred during the port update by the UPnP func-
tion.
• If the router in use does not support the UPnP function, perform
the port forwarding setting for the router. In addition, deactivate the
setting of auto port forwarding for the camera.
Operating
Instructions
(included in
the CD-ROM)
• UPnP function of the router is disabled.
Refer to the operating instructions of the router to enable the
UPnP function.
−
Live indicator never lights up.
• Is "Off" selected for "Link/Access LED" on the "Basic" page?
Select "On" or "On(Access)" for the indicator setting.
Operating
Instructions
(included in
the CD-ROM)
Live indicator keeps on
blinking red.
• The camera may be out of order.
Contact your dealer.
• Refer to the readme file on the provided CD-ROM for further infor-
mation after checking the displayed contents of the "Maintenance"
page - the [Status] tab - "Self check" of the setup menu.
Or refer to our website (http://panasonic.net/pss/security/support/
info.html) for further information about the supported software.
−
Live indicator lights red.
• Isn’t the write protect switch of the inserted SDHC/SD memory
card set to "LOCK"?
Unlock the write protect switch of the SDHC/SD memory card.
• Hasn't the inserted SDHC/SD memory card been formatted on a
PC?
Use an SDHC/SD memory card formatted on the camera.
Or install the software to format the SDHC/SD memory card on
the PC. Refer to our website (http://panasonic.net/pss/security/
support/info.html) for further information about the supported soft-
ware.
• Isn't the inserted SDHC/SD memory card faulty?
Replace the card with a normal one.
Operating
Instructions
(included in
the CD-ROM)
29
Summary of Contents for WV-SC386
Page 35: ...35 ...
