IMPORTANT
•
When “16:9” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from
the image of “4:3”. Therefore even when “16:9” is set, the brightness of the masked area will affect the
image. It is recommended that the aspect ratio should be once set to “4:3” before masking.
A
B
C
A.
Image in the aspect ratio of “4:3”
B.
Areas where the image is not displayed when
“16:9” is selected for the aspect ratio
C.
Image in the aspect ratio of “16:9” (Being cut
out from the aspect ratio of 4:3)
Note
•
When the [Reset] button is clicked, masking for all the masked areas will be canceled.
11.6.4 Configure the settings relating to the preset positions
(“Preset position” setup menu)
Click the [Setup>>] button of “Preset position” on the [Image/Position] tab of the “Image/Audio” page
(
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the
currently displayed image on the [Image/Position] tab.
Operating Instructions
113
11 Configure the settings relating to images and audio [Image/Audio]
