background image

5

X6531

 

X6511

The camera conforms to the IP66*

2

 and Type 4X (UL50)*

3

, is compliant with NEMA 4X*

4

 

ratings, and provides high dust resistance and waterproof performance.

S6530

The camera conforms to the IP66*

2

 and Type 4 (UL50)*

3

, is compliant with NEMA 4*

4

ratings, and provides high dust resistance and waterproof performance.

Waterproofing treatment is not required for the camera body (Waterproofing treatment is required 
for all cable connection parts except for Ethernet cable).

Achieves high-level shock resistance with IK10*

5

 (IEC 62262) conformity.

The camera has a strong shock resistance body which is needed in outdoor installations.

Delivers high image quality streaming at low bit rates thanks to a H.265 engine equipped 
with Panasonic’s own Smart Facial Coding technology*

6

.

This allows H.265 compression in addition to conventional H.264 compression technology, and 
when combined with Smart Facial Coding, reduces data load compared to our previous models.

Panasonic’s own intelligent auto (iA) feature provides increased discernibility even in 
environments with poor visibility

Improvements to the Super Dynamic (SD) feature and shutter speed optimization provides clear 
discernibility even when monitoring moving people or car silhouettes or when license plates are illu-
minated by car headlights. Also, face recognition under the condition where brightness of the back-
ground changes is enabled by a function of recognizing face position and adjusting the brightness 
automatically.

Equipped with SD memory card slot

It is possible to save H.265 / H.264 videos and JPEG images on the SD memory card manually 
when an alarm occurs, during the period of the schedule, or on a Web browser. (Downloading is 
possible.) It is also possible to save JPEG images if a network failure occurs.

Encryption and alteration detection functions enhanced the security.

Heavy salt damage resistance compliant with ISO14993*

7

 (WV-X6531NS only)

Provides heavy salt damage resistance for the camera exterior against corrosion. In addition, use 
anti-corrosive screws for the camera exterior to prevent cohering due to corrosion.

*1  The rain wash coating is only effective against water (rain water) and is not effective against other 

substances such as oil or damage to the dome cover.

*2  IP66: The applicable product has “Dust tight (6)” protection against foreign solids and has 

“Powerful water jets (6)” protection against water (IEC60529).

*3 Type 4X (UL50), Type 4 (UL50): 4X, 4 indicates the rank in the UL waterproof standard.
*4  

NEMA: Dust resistance and waterproof performance standards set by National Electrical 
Manufacturers Association (United States).

*5  IK10: is a standard in regards to shock resistance that represents the level of impact protection, 

and is regulated by the International Electrotechnical Commission (IEC).

*6  This technology allows the camera to learn the location of faces and moving objects, and trans-

mit only the face portion of the image in high definition, thereby greatly reducing the bandwidth 
required.

*7  ISO14993: Standards for accelerated testing involving cyclic exposure to salt mist, dry and wet 

conditions.

Summary of Contents for WV-S6530N





































Reviews: