background image

Specifications

Ambient temperature:

–10 °C to + 50 °C {14 °F to 122 °F}

Dimensions:

185 mm {7-5/16 inches} in diameter x 145 mm
{6-7/16 inches} in height

Mass:

Approx. 800 

g

{1.77 lbs}

Finish: 

Main body: Treatment steel
Decorative cover: ABS resin with silver metallic coating
Dome cover: Acrylic resin

Standard Accessories

Operating Instructions (this book) ............................. 1 pc.

The following are for installation
Safety wire  ................................................................. 1 pc.
Safety wire angle  ....................................................... 1 pc.
Template A  ................................................................ 1 sheet
Template B  ................................................................ 1 sheet
Inner cover  ................................................................ 1 pc.

For U.S. and Canada:

Panasonic i-PRO Sensing Solutions 
Corporation of America

800 Gessner Rd, Suite 700 Houston, TX 77024
https://www.security.us.panasonic.com/

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 
Canada
1-877-495-0580
https://www.panasonic.com/ca/

© Panasonic i-PRO Sensing Solutions Co., Ltd. 2019

Ns1010-5109       3TR006652FZA       Printed in China

For Europe and other countries:

Panasonic Corporation

http://www.panasonic.com

Panasonic i-PRO Sensing Solutions Co., Ltd. 
Fukuoka, Japan

Authorised Representative in EU:

Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

Summary of Contents for WV-Q155C













Reviews: