11
F R ONT
LOC
K
F R O N T
F R ONT
LOC
K
F R O N T
Projections
Hooks for the
decorative cover
*1 position on the
rear side
START
END
F R O N T
FR
ON
T
LOC
K
Mounting base
Camera mounting plate
Align
A
with
A
Align
B
with
B
Fixing screw to be used for cover fall prevention
14. Mount the camera mounting plate on
the mounting base.
q
Align the marks (
A
to
A
and
B
to
B
) between the camera mounting
plate and mounting base.
w
Mount the camera mounting plate on
the mounting base with aligning
g
of
the camera mounting plate with
"START
h
" of the mounting base.
e
Turn the camera mounting plate until
g
of the camera mounting base
aligns with "END
h
" of the mounting
base.
r
Tighten the 3 screws that were
removed in Step 2.
(Recommended tightening torque:
1.6 N·m {16 k
g
f·cm})
Important:
Do not let the cables be
caught during installation work.
15. Mount the decorative cover.
q
Mount the decorative cover on the
camera mounting plate with engag-
ing the projections of the decorative
cover with the hooks for the decora-
tive cover.
w
Turn the decorative cover clockwise
while pressing the projections
upward and the cover is locked.
Important:
The mark, "FRONT", shall be
aligned with the Panasonic logo.
16. Tighten the fixing screw to be used for
cover fall prevention.
(Recommended tightening torque:
1.6 N·m {16 k
g
f·cm})
Note:
When the camera lens is pointed in the horizontal direction, the inner cover inter-
feres with the camera’s view, and consequently about upper half of the monitor screen
is hidden in the WIDE mode.
