9
9. Attach the base unit or the camera
mounting bracket to the camera
mounting stage.
Insert and tighten the 4 screws (M4, acces-
sory)
(Recommended tightening torque:
1.57 N
•
m {1.16 lbf
•
ft})
Note:
Which component to attach depends
•
on the camera model. The base unit is
a main unit component of the camera
and the camera mounting bracket is an
accessory of the camera.
The base unit is attached in figures
•
shown in the following descriptions.
Important:
Make sure to attach the camera mounting bracket in correct direction. If you attempt to
•
attach it in the wrong direction, some part of it will interfere with the camera mounting
stage. Do not try to forcibly attach it as it may cause a failure or falling.
Correct direction
Wrong direction
Base unit
Camera mounting bracket
* Make sure to
attach it in cor-
rect direction.
