6
3. Mount the safety wire angle (accessory) on the 2nd anchor bolt and connect the safe-
ty wire (accessory) to the angle.
Disconnect the safety wire from the
1
safety wire angle.
Engage the face marked
2
1
with the
anchor bolt.
Bend the face marked
3
2
.
Connect the safety wire to the safety
4
wire angle again.
Note:
To use the anchor bolt that was already installed, the use of 2 spacer nuts is helpful.
Spacer nuts
Safety wire
Spacer nuts
Safety wire angle
Existing anchor bolt
4. Remove the camera mounting stage.
Remove the 6 screws (M4).
1
Rotate the camera mounting stage
2
a half-turn clockwise.
Lift the camera mounting stage and
3
remove it.
Upper side
Lower
side
Safety wire
2
Insert
1
Disconnect
3
Bend
Mark
2
Mark
1
4
Connect
Safety wire angle
Anchor bolt
Camera
mounting
stage
Screw (M4) × 6
1
1
1
2
3
2
1
1
1
2
