29
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio
transmitted from the PC.
High/Middle/Low
Default:
Middle
[Audio output interval (PC to Camera)]
Select an interval for audio transmission from the follow-
ing.
160 msec/320 msec/640 msec/1 280 msec
Default:
640 msec
Notes:
• When a shorter interval is selected, the delay time
will be shorter. When a longer interval is selected,
audio interruption may be diminished even though
the delay time will be longer.
Select the interval according to the network environ-
ment.
• Audio may temporarily be interrupted or noise may
be heard the camera, or when multiple users are
accessing concurrently. It may be possible to dimin-
ish the interruption or noise by setting a longer inter-
val for "Audio output interval (PC to Camera)".
• Audio may sometimes not be heard depending on
the network environment.
[Audio output port (PC to Camera)]
Enter the transmission port number (the port number on
the camera used to receive audio data transmitted from
the PC).
Available port number:
1 024 - 50 000 (Only even
numbers are available.)
Default:
34004
Note:
The transmission port number entered for "Audio
output port (PC to Camera)" will be used only when
"Unicast (MANUAL)" is selected for "Transmission
type" (
☞
page 21).
When "Off" is selected for "MPEG-4 transmission"
(
☞
page 21) or when "Unicast (AUTO)" or
"Multicast" is selected for "Transmission type", it is
not necessary to enter the transmission port num-
ber.
[Permission level of audio trans./recep.]
Select an access level for audio transmission/reception
from the following. Refer to page 39 for further informa-
tion about the access level.
Level 1 only/Level 2 or higher/All users
Default:
All users